Army body composition, 2026 standard
Army Body Fat Calculator
Under Army Directive 2026-13 (1 July 2026), the Army measures your waist-to-height ratio, not body fat: your waist at the navel divided by your height must be under 0.55. Check yours the way the Army's form records it, see the most your waist can measure at your height, and see what the old tape test would have said.
Rules as of 19 October 2026
- The standard
- Less than and not equal to 0.55
- Largest recorded waist at 69 in (5 ft 9 in)
- 37.5 in
Sample numbers are filled in. Change any field to see your own ratio.
In socks, standing straight. 5 ft 9 in is 69 in. The Army records it to the nearest half inch.
Tape level and snug, not pressing in, across the navel after a normal breath out. The form records each reading rounded down to the half inch and averages the three.
Your waist-to-height ratio
Edit your height or waist above to see your waist-to-height ratio, whether it meets the Army standard, and the most your waist can measure at your height.
Rules as of 19 October 2026: Army Directive 2026-13 and DA Form 5500 (July 2026). Free, no signup. Not an official Army tool: your record measurement is the one trained measurers take.
What changed on 1 July 2026
Army Directive 2026-13, dated 1 July 2026 and announced on 7 July, replaced the Army's body fat test with one measurement: "The WHtR is adopted as the sole measurement for all Soldiers." The standard is "a WHtR of less than and not equal to 0.55." Under the directive:
- The height and weight screening tables are discontinued.
- No tape test or other body fat assessment is authorized for challenging the ratio, and supplemental scans (DXA, InBody, Bod Pod) went with it.
- No Army Fitness Test score exempts a Soldier. Both earlier exemptions are rescinded: Army Directive 2025-17, under which 465 points or more on the record AFT, with at least 80 points in each event (all five primary events, no alternates), counted as meeting the body fat standard, and the earlier 540-point ACFT exemption.
- Soldiers are measured at least twice per calendar year. A first result of 0.55 or more is checked by a different team on the same duty day; a confirmed result means a flag and enrollment in the Army Body Composition Program.
- No Soldier will be separated until a 180-day assessment is completed by Headquarters, Department of the Army, and further guidance is issued. The Army's announcement says that assessment will "validate accuracy and determine if adjustments are needed."
The Department of War's Instruction 1308.03(effective 31 August 2026) keeps the same under-0.55 limit for every service, but adds a body fat calculation at 0.55 or above and measures the waist between the lowest rib and the top of the hip bone. As of 19 October 2026 we found no Army document putting either change into effect, so this calculator follows Army Directive 2026-13 and DA Form 5500.
How the Army measures you
DA Form 5500 (July 2026) sets the rounding. The calculator applies the same steps:
- Height is recorded to the nearest 0.5 inch.
- The waist is measured at the navel (belly button) and rounded down to the nearest 0.5 inch. It is measured three times.
- The three readings are averaged to three decimal places. If one of them is more than an inch off the other two, the Army's implementing guidance takes a fourth reading and averages the three closest. (That guidance averages to the nearest half inch, where the form keeps three decimals; the calculator follows the form.)
- The average waist is divided by the height. The result keeps three decimals, and "any subsequent digits after the third decimal place will be disregarded." The form's example: 0.549888 is recorded as 0.549, which meets the standard; 0.550 does not.
If you measure in centimetres, the calculator converts with the exact 2.54 cm per inch before any rounding.
Maximum waist for your height
The largest waist the Army records at each height that still meets the standard. Each reading is rounded down to the half inch, so a tape reading anywhere under the next half inch records as this figure: at 68 in, readings under 37.5 in meet. The calculator gives the figure for half-inch heights too.
| Height | Largest recorded waist | Meets if every reading is under |
|---|---|---|
| 58 in (4 ft 10 in) | 31.5 in | 32.0 in |
| 59 in (4 ft 11 in) | 32.0 in | 32.5 in |
| 60 in (5 ft 0 in) | 32.5 in | 33.0 in |
| 61 in (5 ft 1 in) | 33.5 in | 34.0 in |
| 62 in (5 ft 2 in) | 34.0 in | 34.5 in |
| 63 in (5 ft 3 in) | 34.5 in | 35.0 in |
| 64 in (5 ft 4 in) | 35.0 in | 35.5 in |
| 65 in (5 ft 5 in) | 35.5 in | 36.0 in |
| 66 in (5 ft 6 in) | 36.0 in | 36.5 in |
| 67 in (5 ft 7 in) | 36.5 in | 37.0 in |
| 68 in (5 ft 8 in) | 37.0 in | 37.5 in |
| 69 in (5 ft 9 in) | 37.5 in | 38.0 in |
| 70 in (5 ft 10 in) | 38.0 in | 38.5 in |
| 71 in (5 ft 11 in) | 39.0 in | 39.5 in |
| 72 in (6 ft 0 in) | 39.5 in | 40.0 in |
| 73 in (6 ft 1 in) | 40.0 in | 40.5 in |
| 74 in (6 ft 2 in) | 40.5 in | 41.0 in |
| 75 in (6 ft 3 in) | 41.0 in | 41.5 in |
| 76 in (6 ft 4 in) | 41.5 in | 42.0 in |
| 77 in (6 ft 5 in) | 42.0 in | 42.5 in |
| 78 in (6 ft 6 in) | 42.5 in | 43.0 in |
| 79 in (6 ft 7 in) | 43.0 in | 43.5 in |
| 80 in (6 ft 8 in) | 43.5 in | 44.0 in |
The old tape test, June 2023 to July 2026
Army Directive 2023-11 (9 June 2023) introduced a one-site test: one abdominal measurement at the navel, plus your weight, after you exceeded the height and weight screening table. It was phased in over a year, and from 12 months after the directive it was the only authorized tape method. The equations, from the implementing guidance (Table B-5), were:
- Men:
% body fat = -26.97 - (0.12 x weight in lb) + (1.99 x abdomen in inches) - Women:
% body fat = -9.15 - (0.015 x weight in lb) + (1.27 x abdomen in inches)
The result was rounded to the nearest whole percent; the Army's worked example for a man of 210 lb with a 35 inch abdomen gives 17.48, recorded as 17%. The calculator's old-test panel reproduces the Army's printed charts, and the limits came from AR 600-9, Table B-2:
| Age | Men | Women |
|---|---|---|
| 17 to 20 | 20% | 30% |
| 21 to 27 | 22% | 32% |
| 28 to 39 | 24% | 34% |
| 40 and older | 26% | 36% |
Before that the Army used the multi-site tape test: neck and abdomen for men, neck, waist and hips for women, with the logarithmic equations in AR 600-9, Table B-5. That is the method our body fat calculator uses to estimate body fat.
How the other services differ
Marine Corps. Since 1 January 2026 the Marine Corps screens with waist-to-height ratio: a ratio of less than or equal to 0.52, the same for men and women, with a table of maximum waists by height in MARADMIN 066/26. The waist is measured at the navel twice, the lower kept and rounded down to the half inch, and height is rounded down to the half inch. Marines over the table are evaluated for body fat by the multi-site tape test or bioelectrical impedance, against body fat standards that remain unchanged.
Navy. The Navy's Guide-4 (June 2026) uses two steps. Step 1 is the waist-to-height ratio, rounded down to four decimals, with 0.5499 or less within standards. Sailors at 0.5500 or more go to step 2, a body fat estimate from Navy tables using height minus waist and weight, with limits of 26% for men and 36% for women. It records only height, waist and weight.
Air Force. AFMAN 36-2905 (24 March 2026) scores the ratio as up to 20 points of the fitness assessment, measured midway between the lowest rib and the top of the hip bone and truncated to two decimals. Airmen above .55 who also fail the assessment take a body fat assessment, with standards under 26% for men and under 36% for women. The Space Force has its own manual.
Each service's rule above is as of its dated document, and all three predate the Department of War's Instruction 1308.03 (effective 31 August 2026). The Air Force manual, for one, sends Airmen above .55 to a body fat assessment only if they also fail the fitness assessment, where the instruction calls for a body fat calculation at 0.55 or above.
Sources
All documents are US Government works; none states a copyright or licence (17 U.S.C. 105). Read on 19 October 2026.
- Army Directive 2026-13, Army Body Composition Program and Standards (1 July 2026)The standard, what it replaced, confirmation, separation pause.
- DA Form 5500, Army Body Composition Screening and Assessment Worksheet (July 2026)How height and waist are recorded and how the ratio is cut to three decimals.
- EXORD 182-26, Annex A: Implementing Guidance for Waist to Height Ratio Measurement Procedures for the ABCPThe measuring procedure, the fourth reading when readings disagree, and the maximum waist table.
- Army news: Army modifies body composition program, adopts waist-to-height ratio (7 July 2026)The announcement and the 180-day assessment.
- AR 600-9, The Army Body Composition Program (16 July 2019, administrative revision 27 February 2025), Table B-2The program regulation, and the age and sex body fat limits used until 1 July 2026.
- ALARACT 032/2025 with its implementing guidance and one-site tape charts (archived copy of the Army file)The one-site equations, worked examples and charts.
- Army Directive 2023-11, Army Body Fat Assessment for the Army Body Composition Program (9 June 2023; archived copy of the Army file)The one-site tape test, rescinded by Army Directive 2026-13.
- DoW Instruction 1308.03, DoW Physical Fitness/Body Composition Program (effective 31 August 2026)The Department-wide rule, paragraph 3.2.g.
- MARADMIN 066/26 (Marine Corps, 26 February 2026)The Marine Corps screening and its table.
- Marine Corps revises body composition standards (Training and Education Command, 26 February 2026)The Marine Corps standard: a ratio of less than or equal to 0.52.
- Navy Physical Readiness Program Guide-4, Body Composition Assessment (June 2026)The Navy's two-step assessment.
- AFMAN 36-2905, Air Force Physical Fitness Readiness Program (24 March 2026)The Air Force assessment.
Frequently asked questions
What is the Army body fat standard in 2026?
Under Army Directive 2026-13 (1 July 2026) there is no body fat percentage standard: the waist-to-height ratio is the sole measurement for all Soldiers, and "The standard is a WHtR of less than and not equal to 0.55." You divide your waist at the navel by your height, both in inches, and the result has to be under 0.55.
Will the Army bring back a body fat test?
It might. The Department of War's Instruction 1308.03 (effective 31 August 2026, para 3.2.g.(7)) says Service members at 0.55 or above "will be further evaluated by a body fat (BF) calculation", a step Army Directive 2026-13 does not have. As of 19 October 2026 we found no Army document adding it, so this calculator follows the directive.
Does the Army still do the tape test?
No. Army Directive 2026-13 discontinued the height and weight screening tables and says no circumference-based tape test or other body fat assessment may be used to challenge the waist-to-height ratio. The one-site tape test was rescinded together with Army Directive 2023-11, which had introduced it on 9 June 2023.
How does the Army measure waist and height for the ratio?
DA Form 5500 (July 2026) records height to the nearest 0.5 inch. The waist is measured at the navel, rounded down to the nearest 0.5 inch, three times, and the readings are averaged to three decimal places. The average is divided by the height.
Is a ratio of exactly 0.55 a pass?
No. The standard is "less than and not equal to 0.55". The form keeps three decimals and disregards the rest, so 0.549888 is recorded as 0.549 and meets the standard, while 0.550 does not.
Is the standard different by age or sex?
No. Army Directive 2026-13 sets one standard, a ratio under 0.55, for all Soldiers. The old body fat limits (20 to 26% for men and 30 to 36% for women, by age) ended on 1 July 2026.
Does a high Army Fitness Test score exempt me?
No. Army Directive 2026-13 says "No AFT score exempts a Soldier from meeting the WHtR standard" and rescinded Army Directive 2025-17, under which 465 points or more on the record AFT, with at least 80 points in each event (all five primary events, no alternates), counted as meeting the body fat standard.
What happens if my ratio is 0.55 or more?
A different team measures again on the same duty day before any action. A Soldier with a ratio of 0.55 or greater is flagged and enrolled in the Army Body Composition Program. The directive also says no Soldier will be separated until a 180-day assessment is completed by Headquarters, Department of the Army, and further guidance is issued.
How often is the ratio measured?
At least twice per calendar year, and commanders may direct a measurement at any time. The directive gave units 90 days from its date to measure and record every Soldier.
Can a DEXA scan or InBody result overturn the ratio?
No. Under Army Directive 2026-13, supplemental body fat assessments are no longer authorized to challenge the waist-to-height ratio. Before 1 July 2026, a Soldier who failed the tape test could request one.
What was the old one-site tape test formula?
From 9 June 2023 the Army used one abdominal measurement at the navel and your weight. Men: % body fat = -26.97 - (0.12 x weight in pounds) + (1.99 x abdomen in inches). Women: % body fat = -9.15 - (0.015 x weight in pounds) + (1.27 x abdomen in inches), rounded to the nearest whole percent. It was rescinded on 1 July 2026.
Do the Marine Corps, Navy and Air Force use the same test?
They all start with waist-to-height ratio, but the details differ. The Marine Corps uses a stricter 0.52 line, then a body fat evaluation for Marines over it. The Navy screens at 0.55 and then estimates body fat for Sailors at or above it. The Air Force scores the ratio as part of its fitness assessment. The sections above give each service's rule and source.
Does the Army still have height and weight standards?
Not for Soldiers. Army Directive 2026-13 (1 July 2026) says "the use of height and weight screening tables is discontinued", so there is no weight limit or weight chart for serving Soldiers. A waist-to-height ratio under 0.55 is the sole measurement, the same for men and women. The directive covers Soldiers in the Regular Army, Army National Guard and Army Reserve, and USMA and Senior ROTC cadets. It does not mention enlistment applicants, and this page does not cover the standards for joining.
What is the biggest waist the Army allows for my height?
It depends on your height. At 5 ft 4 in (64 in) the largest waist that meets the standard is 35 inches, and since each reading is rounded down to the half inch, any tape reading under 35.5 inches counts as 35. At 5 ft 6 in the limit is 36 (readings under 36.5), at 5 ft 10 in 38 (under 38.5), and at 6 ft 39.5 (under 40). The table on this page lists every height from 58 to 80 inches, and the calculator gives half-inch heights too.
What is the Army Body Composition Program (ABCP)?
It is the Army's body composition program, set out in AR 600-9 and, since 1 July 2026, governed by Army Directive 2026-13. A Soldier with a confirmed ratio of 0.55 or more is flagged and enrolled. For Regular Army and AGR Soldiers the commander requests a medical exam to rule out an underlying condition; Guard and Reserve Soldiers may request one if there is reason to believe such a condition is the cause, at their own expense if they are not on active duty. Monthly assessments while enrolled were rescinded, and Soldiers leave as soon as they meet the standard.
Is waist-to-height ratio the same as body fat percentage?
No. It is your waist divided by your height in the same unit: a 37 inch waist at 68 inches is 0.544. Army Directive 2026-13 calls it a "health risk assessment tool", and the Marine Corps' MARADMIN 066/26 says it is "a health risk assessment and not a direct measurement of body fat percentage." The old tape test panel above still shows a body fat estimate; under Army Directive 2026-13, the ratio alone decides whether a Soldier meets the Army standard.
Want a body fat estimate instead?
Live tool
Body Fat Calculator
Estimate body fat with the Navy tape method, skinfolds or height and weight, plus lean mass and FFMI. A fitness estimate, not the Army standard.
Open Body Fat CalculatorLive tool
Lean Body Mass Calculator
See how much of your weight is muscle, bone and water, and what a cut would leave.
Open Lean Body Mass CalculatorLog your lifts in Stronger
The calculator checks one number. Stronger logs every set, scores your strength on the major lifts against bodyweight standards and shows whether you're getting stronger.
Start tracking free